What does this skill do?

The Network Interface Diagnostics Skill analyzes interface counters on Cisco IOS devices and Linux hosts to identify the root cause of connectivity issues such as CRC errors, packet drops, collisions, and flapping. It establishes a baseline, compares increases at both ends of the link, and returns a recommendation for immediate action: replace the cable, clean the fiber, adjust the duplex setting, or review QoS.

CRC Error Analysis
Identifies input errors and CRC errors to detect damaged cable, dirty fiber, a defective transceiver, or a duplex mismatch.
Diagnosing Packet Loss
Difference between outbound drops (congestion, restrictive QoS) and inbound drops (oversubscription, CPU pressure).
Flapping Detection and Restarts
Detects resets, collisions, and keepalive issues associated with incorrect duplex negotiation.
Comparison of the Two Extremes
Check the counters on the local and remote computers before replacing hardware to confirm the source of the failure.

Usage examples

🔍 Cisco IOS Diagnostics
I have a GigabitEthernet0/1 interface with an increasing number of CRC errors. I ran the "show interfaces" command and am attaching the output. What is the root cause?
🐧 Troubleshooting on Linux
My Linux server is losing packets on eth0. Here is the output of `ip -s link show eth0` and `ethtool -S eth0`. What's going on?
⚖️ Compare both extremes
I have the "show interfaces" output for both ends of a link. Compare them and tell me if there's a duplex mismatch.
📊 Pre- and post-change data
I'm going to replace a fiber cable. Take a snapshot of the current interface counters to have a record before the replacement.

Features

Baseline and Comparison of Increases Record meter readings at two different times to measure the actual trend, not the cumulative absolute value.
Cisco IOS and Linux Support It interprets the output of `show interfaces`, `show interfaces status`, `ip -s link`, `ethtool`, and `ethtool -S`.
Secure Parser in Python Extract counters by selecting blocks of text to avoid assigning errors to the wrong port.
Recommendation for Direct Action Returns a specific action: replace a cable, clean the fiber, adjust the duplex setting or speed, or check QoS and queues.
Duplex Mismatch Detection Identifies incorrect negotiations caused by mixing auto-negotiation with a fixed configuration at one end.

Frequently asked questions

No. You can paste the output of the commands (show interfaces, ip -s link, ethtool) into Claude, and the skill will analyze the counters without requiring a direct connection.
The skill is designed for Cisco IOS routers and switches and for Linux hosts. The counter patterns are applicable to most standard network devices.
Reception errors usually indicate a problem with the signal coming to that end, not with the port reporting the error. Comparing both ends prevents you from replacing the wrong hardware.
Yes. The skill is designed to capture meter readings before and after an intervention, making it ideal for verifying that the change resolved the problem.
Network Interface Diagnostics — Troubleshooting Network Issues with Claude AI

¿Prefieres escuchar el contenido? Genera la narración de audio con un clic.